|
Material Properties
- Light Machinable solid buoyancy material
- It is a kind of low-density, high-strength and lightweight composite materials. With the peculiarities of low density, large buoyancy, high compressive strength, low water absorption and stable
- Density range is 0.40 ~ 0.60g/cm3
- Good weather resistance, Resistance to seawater corrosion
Apply
- Machinable solid buoyancy material can be applied to underwater facilities to meet the ocean exploration, ocean mining and other requirements.
- This product has been applied to submarine rescue buoys, underwater mining machine, a submarine towed antenna, submarine rescue capsule, the submarine signal buoys, underwater robotics, ocean submersible standard, seabed areas such as the release ball flroat since the product was delivered
Supply
- Can be provided in any form
- Machinable solid buoyancy material may assembly adhesives as building block, it also can be configured according to users need.
Typical Characteristics
|
Item
|
Value
|
|
Overall Density (g/cm3)
|
0.40～0.60
|
|
Resistance to hydrostatic pressure (MPa)
|
8～50
|
|
Water absorption (%)
|
≤1
|
|
Temperature (° C)
|
-45～80°C
|
|
Electromagnetic Transmission rate (%)
|
≥90
|
Performance
|
Products
|
Model
|
Density (g/cm3)
|
Compressive strength (MPa)
|
Submersible depth (m)
|
|
Machinable Series
|
SYS-040
|
0.4 ±0.02
|
≥8
|
1000
|
|
SYS-050
|
0.48 ±0.02
|
≥15
|
2500
|
|
SYS-060
|
0.58 ±0.02
|
≥40
|
4000
|
Note: The products are arranged according to density label. For example, SYS-040 refers to the density of solid buoyancy material is 0.40g/cm3. Products listed in the table is just a part of the series.
Instruction
- Solid buoyant material can be processed, epoxy-based adhesive for bonding is recommended
- To obtain the appropriate use, the product can be coated with putty and decorative paint upon request
|
